Cart 0

** Luminor Professional series LBH6-251A NSF STANDARD 55 CLASS A, Independently Certified for Primary Disinfection


  • 1,89120
  • Save $397

Model #: LBH6-251A
BLACKCOMB-HO 6.0 Validated Multi-Use UV Systems                                                                            ( LBH6-251A  7.9 gpm - 29.9 lpm )

Flow rates stated at NSF Class A dose of 40 mJ/cm2 at 70% UVT


If you are looking for an independently validated UV system for PRIMARY disinfection of a, Bacteriologically contaminated water source, LUMINOR’s new “NSF 55 CLASS A” validated systems is your solution.

The BLACKCOMB-HO 6.0 version comes with a true 254nm Teflon® based UV sensor to continuously monitor the UV output (performance) of the system and delivers a graphical colour representation of the % UV intensity provided by the system.

Based on a modular, plug and play platform, the BLACKCOMB-HO system has the most advanced residential controller on the market with a colour user interface with a multitude of screens displaying diagnostics, status, warnings and even QR codes for a link back to LUMINOR’s website.

Couple this with the capability to fully customize the colour screens with your dealer information, or different language, and you can easily see how this UV system shines above all others.

Product Features

True 254nm Teflon® based UV sensor continually measures UV output and visually displays output via the controller

  •  Colour user interface with full diagnostics and warnings including QR codes

  •  ”Future-proof” expandability port for future upgrades and options

  •   Axial flow, single ended, 304 stainless steel, polished reactors.

  •  Designed & manufactured to ASME pressure vessel standards

  •  User friendly bayonet style lamp connector (quick 1/4 turn removal with no extra tools needed)

  • Reliable, industry proven LOW pressure (LP-HO) coated UV lamps with ceramic bases for durability and a 10,000 hour life (14 months)

  •  Constant current electronic controller (one controller for all systems) in a splash-proof case

  • UV sensor with 4-20 mA output capabilities and solenoid-ready capabilities                                        (optional modules required)

  • IEP (infinite expandability port) for future upgrades & options

  • 304 stainless steel (BLACKCOMB) / 316L stainless (BLACKCOMB-HO), axial flow reactors allow for simple lamp/sleeve service

  • All systems include integral flow restrictor

BLACKCOMB-HO systems using HIGH OUTPUT UV LAMPS                                                              (900 mA output rated at 10,000 hours life.)

Replacement Lamp  RL-600HO   

Replacement Sleeve RQ-600

This Class A system conforms to NSF/ANSI 55 for the disinfection of microbiologically contaminated water that meets all other public health standards. The system is not intended to convert wastewater or raw sewage to drinking water. The system is intended to be installed on visually clear water.

NSF/ANSI 55 defines wastewater to include human and/or animal body waste, toilet paper, and any other material intended to be deposited in a receptacle designed to receive urine and/or feces (blackwaste), and other waste materials deposited in plumbing fixtures (greywaste).

If this system is used for the treatment of untreated surface waters or ground water under the direct influence of surface water, a device found to be in conformance for cyst reduction under the appropriate NSF/ANSI standard shall be installed upstream of the system.

While testing was performed under standard laboratory conditions, actual performance may vary.
The systems and installation shall comply with applicable provincial/state and local regulations.

LUMINOR UV systems are covered by the following warranty:

REACTORS.....Ten (10) year Limited Warranty

ELECTRONICS.....Three (3) year Limited Warranty

UV LAMPS.....One (1) year Limited Warranty

QUARTZ SLEEVES.....One (1) year Limited Warranty

UV SENSORS.....One (1) year Limited Warranty




We Also Recommend