Luminor Professional series LB6-101A NSF STANDARD 55 CLASS A, Independently Certified for Primary Disinfection
Flow rates stated at NSF Class A dose of 40 mJ/cm2 at 70% UVT
If you are looking for an independently validated UV system for PRIMARY disinfection of a, Bacteriologically contaminated water source, LUMINOR’s new “NSF 55 CLASS A” validated systems is your solution.
The BLACKCOMB 6.0 version comes with a true 254nm Teflon® based UV sensor to continuously monitor the UV output (performance) of the system and delivers a graphical colour representation of the % UV intensity provided by the system.
Based on a modular, plug and play platform, the BLACKCOMB system has the most advanced residential controller on the market with a colour user interface with a multitude of screens displaying diagnostics, status, warnings and even QR codes for a link back to LUMINOR’s website.
Couple this with the capability to fully customize the colour screens with your dealer information, or different language, and you can easily see how this UV system shines above all others.
True 254nm Teflon® based UV sensor continually measures UV output and visually displays output via the controller
Colour user interface with full diagnostics and warnings including QR codes
”Future-proof” expandability port for future upgrades and options
Axial flow, single ended, 304 stainless steel, polished reactors.
Designed & manufactured to ASME pressure vessel standards
User friendly bayonet style lamp connector (quick 1/4 turn removal with no extra tools needed)
Reliable, industry proven low pressure (LP) coated UV lamps with ceramic bases for durability and a 9000 hour life (1 year)
Constant current electronic controller (one controller for all systems) in a splash-proof case
UV sensor with 4-20 mA output capabilities and solenoid-ready capabilities ( optional modules required)
IEP (infinite expandability port) for future upgrades & options
304 stainless steel (BLACKCOMB) / 316L stainless (BLACKCOMB-HO), axial flow reactors allow for simple lamp/sleeve service
All systems include integral flow restrictor
BLACKCOMB systems using STANDARD OUTPUT UV LAMPS (425 mA output rated at 9000 hours life.)
Replacement Lamp RL-820
Replacement Sleeve RQ-820
This Class A system conforms to NSF/ANSI 55 for the disinfection of microbiologically contaminated water that meets all other public health standards. The system is not intended to convert wastewater or raw sewage to drinking water. The system is intended to be installed on visually clear water.
NSF/ANSI 55 defines wastewater to include human and/or animal body waste, toilet paper, and any other material intended to be deposited in a receptacle designed to receive urine and/or feces (blackwaste), and other waste materials deposited in plumbing fixtures (greywaste).
If this system is used for the treatment of untreated surface waters or ground water under the direct influence of surface water, a device found to be in conformance for cyst reduction under the appropriate NSF/ANSI standard shall be installed upstream of the system.
While testing was performed under standard laboratory conditions, actual performance may vary.
The systems and installation shall comply with applicable provincial/state and local regulations.
LUMINOR UV systems are covered by the following warranty:
REACTORS.....Ten (10) year Limited Warranty
ELECTRONICS.....Three (3) year Limited Warranty
UV LAMPS.....One (1) year Limited Warranty
QUARTZ SLEEVES.....One (1) year Limited Warranty
UV SENSORS.....One (1) year Limited Warranty
We Also Recommend
* Viqua UV PRO-10 Professional Plus Series NSF class 55 A, Independently Certified for Primary Disinfection.
* Viqua UV PRO-20 Professional Plus Series NSF class 55 A, Independently Certified for Primary Disinfection.
* Viqua UV PRO-30 Professional Plus Series NSF class 55 A, Independently Certified for Primary Disinfection.